Electricians in
Erindale.

Need a electrician in Erindale? The housing here is predominantly 1950s-1970s detached homes on generous blocks, many original condition. some modern infill development.. Local homeowners commonly need help with original asbestos products in eaves and wet areas, dated wiring without safety switches, clay sewer pipes with tree root infiltration, original timber windows rotting. Knowing what to expect makes the difference between a good experience and an expensive mistake.

Modern homes in Erindale typically have adequate wiring but may need upgrades for EV chargers, home offices, or additional split-system air conditioners. The most common call-outs are tripping safety switches (usually a faulty appliance), adding power points or data cabling, and upgrading outdoor lighting.

Electricians typically charge $80–$160/hr for standard work and $140–$250/hr for after-hours calls. Most quote fixed prices for common jobs like power points and switchboard upgrades.

Common electrician jobs and typical 2026 costs:

• Power point installation ($200–$600)
• Switchboard upgrade ($2,000–$7,000)
• LED downlight install ($80–$350 each)
• Ceiling fan installation ($300–$1,200)
• Safety switch (RCD) install ($250–$750)
• Full rewiring 3-bed ($10,000–$35,000)
• EV charger installation ($1,800–$6,500)

Prices vary by complexity, materials, access, and urgency. After-hours and emergency work typically costs 50-100% more. The most reliable way to get an accurate price is to describe your specific job and compare quotes from multiple verified professionals.

Verify their electrical licence number. Ask for a Certificate of Compliance (CoC) after every job — this is a legal requirement. Check they test safety switches before leaving. Ask about warranty on parts and labour.

Ask if they hold an A-grade electrical licence (can supervise) or a restricted licence. For switchboard upgrades, ask whether they'll install a safety switch (RCD) — legally required in rental properties. Request a compliance certificate after the work is completed.

Call an electrician urgently if you smell burning from an outlet or switchboard — this indicates overheating wiring and is a fire risk. Sparks from a power point, a safety switch that will not reset, or lights flickering across multiple rooms all require same-day attention. Power to one room failing while the rest of the house works usually means a tripped circuit breaker — check your switchboard first before calling. For planned work like additional power points or downlight upgrades, schedule at your convenience and get multiple quotes.

Bundle multiple electrical jobs into one visit — adding power points, upgrading downlights, and installing a ceiling fan in a single booking saves repeat call-out fees ($80-$150 each). Ask about LED alternatives to halogen — the upfront cost is higher but energy savings pay for themselves within 12 months. For switchboard upgrades, get this done before other electrical work to avoid paying for two visits. If you are renovating, have the electrician do the rough-in while walls are open — retrofitting wiring in closed walls costs 3-4 times more.

Seasonal electrical demand in flat Adelaide suburbs peaks during summer when air conditioning loads strain older switchboards. If your safety switch trips when the aircon starts, your switchboard likely cannot handle the load — an electrician can add a dedicated aircon circuit for $300-$600. In winter, electric heater use on ageing circuits can cause similar issues. Spring is the ideal time for a switchboard inspection.

All electrical work in Australia must be performed by a licensed electrician — no exceptions, no dollar threshold. This includes power points, light switches, wiring, switchboard work, and ceiling fan installation. DIY electrical work is illegal and dangerous.

Every electrician on Find A Tradie is verified against government licensing records before receiving job leads. You can check any tradie's licence yourself on the CBS SA website.